Need help? Call us today on
01904 737095
or email the team directly at:
sales@yorkshireprofiles.co.uk
Well it’s that time again for our annual satisfaction survey! Here are the results we collected from our forms: (Blue = 2012, Red = 2013). Customer Satisfaction Results 2012 vs 2013 Overall, these are another fantastic set of results and we received lots of amazing comments about the services we provide, thank you to everyone […]
This box was produced for an environmental based business in the UK. It was cut on our laser then folded and welded by our fabrication team. It was important to have a high quality weld on all seams as any discrepancies would show through the powder coating. A mild steel box welded and powder coated […]
We were recently asked to manufacture a one off small disk for a University project which was quite challenging for our laser. The main problem was that it was to be made out of thin mild steel. The disk had to have very narrow slots put in leaving only 0.2mm of material between each slot. […]
This project was to fully fabricate a stainless steel gantry for the food industry. This stainless steel fabrication was designed by one of our clients and fully fabricated by ourselves to their specifications. First the stainless steel box sections were cut to length and welded to create the frame. The facia plates were nearly 4 […]
Capturing the moment when a 4Kw laser pierces mild steel is always spectacular. Capturing the moment the laser piercing steel always makes for good pictures. A 4Kw laser can very quickly pierce through mild steel. Close up of our “eco pierce” on 10mm thick mild steel.
